The Benefits of Aluminum Wheelchair Ramps
For people that are disabled, it is really hard to move around or go up the stairs. And so, there are lots of wheelchairs ramps that are accessible in several varied sizes or lengths to enable a person in wheelchair to get around quite easily. For information about wheelchair ramps, view here for more.
Most people in wheelchairs simply wish to move about as normal people do, but they need assistance from other people or things such as steps. There has to be a wheelchair ramp so that they can get in and get out.
Of all the ramp styles, an aluminum handicap ramp is regarded as the most handy. The soldered aluminum construction is lighter, stronger, and will last longer than wood. Such a wheelchair ramp installation can be dismantled or set up in practically all configurations and reused anywhere. The aluminum surface practically requires no maintenance at all. Installation is fast and wheelchair ramps for home will not require any building permit as it can be regarded as some temporary structure. Aluminum ramp systems ate a most effective option, are free of maintenance, as well as require minimal tools. A foot ramp that measures 24 inches can be fitted in one hour or even less.
Aluminum ramps may either be temporarily or permanently installed as well as can be re-constructed and moved. Additionally, such aluminum ramp is tough against salt and snow unlike its wooden counterpart.
The various types of wheelchair ramps accessible allow persons with disabilities to easily maneuver steps and cross over any doorway heights. Wheelchair ramps likewise can help you load and unload a wheelchair out of a vehicle.
How wheelchair ramp installation should be done
To comply with ADA standards, wheelchair ramps must have a ramp that measures one foot per inch of rise. Only when the space is inadequate will any exceptions to this rule be allowed. For instance, if the porch has 24-inches of total rise in steps, the required ramping would be 24-feet. All ramps that measure above 30 feet needs to have a resting platform halfway. It can either be a straight platform or else a turn platform. This resting platform is required to at least be as long as 60-inches and as wide as well as the ramp leading upwards to it. The minimum measurement of any platform that shifts direction must 60 inches x 60 inches. Wheelchair ramps with over 6 inches of rise or ramps longer than 6 feet are required to be fitted with handrails. Handrails are necessary on the two sections of ramps that feature continuous switchback rails along with dogleg platforms.
If you need help with wheelchair installation, get in touch with National Ramp.